•1.power head, the bored pile drills can finish cast-in-place concrete CFG pile and grouting piles driving by anger rig.
•2. Vibrating hammer. Compression device can finish cast-in-place concrete piles, expanded piles with immersed tube.
•3.hydraulic static pile or diesel pile. Can do precast piles and prestressed Piles.
•4.Three-axises power head for underground continuous wall construction
•5.Lifting tools for uplifting piles
•âÂÂ
Advantages
•1.Crawling mechanism and walking mechanism can be ex-changed.
•2.The column can be adjusted from two sides to ensure verticality of the drilling hole.
•3.drilling and piling at the same time. Improves the efficiency of drilling holes and shortens the time of the project.
•4. No noise, no vibration, no pollution and good quality of drilling holes.
•5. Accuracy and convenience in position by up and down the column
•6.Operation systems like electronic system, hydraulic system, monitor system are all gathered in the operation room for comfortable and convenient operation.
the parameters are as following:
ITEM |
KLB26-800 |
KLB32-800 |
walking way |
electrical foot-step |
electrical foot-step |
max drilling depth |
26m |
32m |
max drilling diameter |
ï¿ 800mm |
ï¿ 800mm |
max output torque |
48.5KN.m |
65KN.m |
rod rotated speed |
20r/min |
20r/min |
allowed lifting force |
400KN |
640KN |
power for power head |
55KW*2 |
55KW*2 |
reductor of power head |
ZZSH450-45 |
ZZSH480-60 |
stanchion supporting way |
three points support |
three points support |
stanchion size |
ï¿ 530mm |
ï¿ 630mm |
stanchion depth |
30.5m |
36.6m |
stanchion oriented center distance |
600*ï¿ 102 |
600*ï¿ 102 |
stanchion incline range |
front inclination 5°
back inclination 3° |
front inclination 5°
back inclination 3° |
rotory |
rotary way |
rotary motor |
rotary motor |
rotary angle |
≤360° |
≤360° |
rotary speed |
0.25r/min |
0.25r/min |
stroke |
1.5m |
1.8m |
lenth of the walking track |
6.0m |
7.3m |
gradeability |
4° |
4° |
speed of incline adjust line |
0.55r/min |
0.55r/min |
main windlass |
single pulling force |
8T |
8T |
motor power |
22KW |
22KW |
increasing speed |
18.5m/min |
18.5m/min |
subsidiary windlass |
single pulling force |
1.5T |
3T |
motor power |
7.5KW |
13KW |
lifting speed |
25m/min |
25m/min |
overall dimensionï¼ÂL*Wï¼Â |
10m*5.2m |
11.5m*6m |
total weight(T) |
50 |
60 |